1, the maintenance of the mixer is mainly part of the maintenance of the reducer, it is mainly in accordance with the above part of the use and maintenance.
2, the blade is not completely immersed in the liquid is strictly prohibited empty operation, so as to avoid danger and equipment damage.
3, equipment, fixed base need to have enough rigidity to ensure that no resonance, no shaking.
4, start the mixer before you make sure that the basic bolts and screws are fully fixed.
5, after the boot device if abnormal sound, temperature and shaking the situation, should immediately stop running and then check and deal with.
6, high speed or large capacity of the mixing operation, the bottom of the shaft or the middle should be installed positioning device to reduce the shaft due to rock caused by the probability of failure.
7, according to different industries, different working conditions, different mixing purposes required by the selection of the mixer is also very important, improper selection of the mixer is likely to cause low service life, high failure rate consequences, such as improper selection caused by Failure, please contact with our factory technical department in time.