Universal self loading mixer
The mobile automatic loading mixer is equipped with concrete loading, metering, mixing and unloading in the vehicle body. It has the function of a concrete transport and mixing station. It makes up for the shortcomings of traditional mixer trucks and can only be loaded at the mixing station. Our mixer truck has a separate hopper that can be loaded and mixed on its own. We can start concrete mixing at any time. In addition, we can accurately control the amount of mixing as needed. This equipment greatly increases production efficiency and reduces production time and costs.
Engine: Cummins water-cooled four-cylinder diesel engine, rated power / speed of 82kW (111HP) / 2200rpm, horizontal placed in the rear of the machine.
Hydraulic system: three control. A variable output pump controls the hydrostatic transmission and the rotation of the agitator, and the two gear pumps are used for maintenance. Equipped with oil and oil filters, air heaters.
Joystick: All hydraulic functions of the bucket are controlled by a fully controlled joystick.
Loading bucket: Volume 600, equipped with hydraulic control opening and closing doors.
Discharge slot: can be rotated and manual tilt, can be quickly removed to increase the discharge height.
Water supply system: self - contained. Hydraulic drive pump with water meter, cleaning outlet. Optional high pressure cleaning pump.
Climbing degree: full load case 30%.
1.Wet the feeding inlet before loading concrete
2.Fill the water tank with water as feeding is being done.
3.Wash the feeding inlet immediately after loading
4.Clean the discharging port after discharging, add about 30L -40L water to mixing drum, and the mixing drum should do positive rotation on the way back.
5.Remember to make the water out of the mixing drum before feeding next time