Concrete agitators manufacturers
The concrete mixer consists of a mixer and a chassis for concrete and concrete. Small concrete mixers are sold with a load of 3~6m3. Usually, the motor is used to drive the hydraulic pump through the power output shaft to drive the hydraulic motor to drive the cylinder with high-pressure oil. It has a load capacity of 9 to 12 cubic meters and uses a truck-mounted diesel engine to propel the hydraulic pump and drive the hydraulic motor. Blades are a key component of the mixing device, and damage and wear can cause uneven concrete. More importantly, the angle of the blade affects the quality of the concrete. If the angle of the blade is not designed properly, the concrete will be isolated.
|Feeding Speed:||M3/min≥ 3|
|Unloading Speed:||M3/min≥ 2|
|Discharge reside rate:||%< 0.5|
1.domestic concrete mixer truck, using the engine power take-off. The function of the power unit is to take out the power through the control force switch, and drive the mixing cylinder through the hydraulic system. During the feeding and conveying process, the mixing cylinder rotates clockwise, which is beneficial to the material conveying and mixing. When discharging, the mixing cylinder will be counterclockwise. Rotate. After work, the operator should cut off the connection between the engine power and the mixing cylinder.
2. Hydraulic system. The engine's power is converted to hydraulic energy, the mechanical energy is rotated by the electric motor, and the cylinder is powered.
3. Decelerate the speed of the motor in the hydraulic system and deliver it to the mixer drum.